Navigation

professor PhD Leposava Ristić

associate professor
The Department of Power Drives and Converters

Zgrada tehničkih fakulteta, kancelarija 23

011/3218-364
Title electrical engineer, PhD
Scientific Area Power converters and drives
Promotion Date November 19, 2021

Subjects

Subjects from the curriculum 2013

Bibliography

Papers in journals with SCI list

DFIG-based WECS with Partial-Scale Converter: Efficiency, Cost and Volume Comparison of SiC-based and IGBT-based Converter Solution

H. Hussain, J. Lončarski, L. Ristić, A. Bellini, DFIG-based WECS with Partial-Scale Converter: Efficiency, Cost and Volume Comparison of SiC-based and IGBT-based Converter Solution, IEEE ACCESS, Vol. Volume 12, pp. 89908 - 89920, Jun, 2024

Authors Hussain Hussain, Jelena Lončarski, Leposava Ristić, and Alberto Bellini
Year 2024
DOI 10.1109/ACCESS.2024.3419810
Journal IEEE ACCESS
Impact factor 3.9 (M22)
Volumen Volume 12
Page from 89908
Page to 89920

Hardware-in-the-loop testing of brushless doubly fed reluctance generator under unbalanced grid voltage conditions

T. Taluo, L. Ristić, M. Agha-Kashkooli, M. Jovanović, Hardware-in-the-loop testing of brushless doubly fed reluctance generator under unbalanced grid voltage conditions, International Journal of Electrical Power & Energy Systems, Vol. 158, No. 109940, pp. 1 - 11, Jul, 2024

Authors Taufik Taluo, Leposava Ristić, Mohammad-Reza Agha-Kashkooli, and Milutin Jovanović
Year 2024
DOI https://doi.org/10.1016/j.ijepes.2024.109940.
Journal International Journal of Electrical Power & Energy Systems
Impact factor 5.2 (M21)
Volumen 158
Number 109940
Page from 1
Page to 11

Improvement of two grid power factor control methods for matrix converter open-end-winding drive with common-mode voltage elimination supplied by unbalanced grid

Luka Stanić, Leposava Ristić, Milan Bebić, Marco Rivera, Improvement of two grid power factor control methods for matrix converter open-end-winding drive with common-mode voltage elimination supplied by unbalanced grid, IET POWER ELECTRONICS, pp. 1 - 16, Oct, 2022

Authors Luka Stanić, Leposava Ristić, Milan Bebić, and Marco Rivera
Year 2022
DOI https://doi.org/10.1049/pel2.12411
Journal IET POWER ELECTRONICS
Impact factor 2.641 (M22)
Page from 1
Page to 16

Comparative Study of Classical and MPC Control for Single-Phase MMC Based on V-HIL Simulations

M. Majstorovic, M. Rivera, L. Ristić, P. Wheeler, Comparative Study of Classical and MPC Control for Single-Phase MMC Based on V-HIL Simulations, ENERGIES, Vol. 14, No. 11, pp. 1 - 17, May, 2021

Authors Milovan Majstorović, Marco Rivera, Leposava Ristić, and Patrick Wheeler
Year 2021
DOI https:// doi.org/10.3390/en14113230
Journal ENERGIES
Impact factor 3.252 (M22)
Volumen 14
Number 11
Page from 1
Page to 17

Dynamic Modeling and Control of BDFRG under Unbalanced Grid Conditions

T. Taluo, L. Ristić, M. Jovanovic, Dynamic Modeling and Control of BDFRG under Unbalanced Grid Conditions, ENERGIES, Vol. 14, No. 14, pp. 1 - 22, Jul, 2021

Authors Taufik Taluo, Leposava Ristić, and Milutin Jovanovic
Year 2021
DOI https://doi.org/10.3390/ en14144297
Journal ENERGIES
Impact factor 3.252 (M22)
Volumen 14
Number 14
Page from 1
Page to 22

Concrete base influence on the increased vibrations level of the mill drive system elements - A case study

Milorad Pantelić, Predrag Jovančić, Leposava Ristić, Milan Bebić, Concrete base influence on the increased vibrations level of the mill drive system elements - A case study, ENGINEERING FAILURE ANALYSIS, Vol. 106, pp. 1 - 10, Dec, 2019

Authors Milorad Pantelić, Predrag Jovančić, Leposava Ristić, and Milan Bebić
Year 2019
DOI 10.1016/j.engfailanal.2019.104178
Journal ENGINEERING FAILURE ANALYSIS
Impact factor 2.897 (M21)
Volumen 106
Page from 1
Page to 10

Analytical and Simulation Fair Comparison of Three Level Si IGBT Based NPC Topologies and Two Level SiC MOSFET Based Topology for High Speed Drives

J. Lončarski, V. Monopoli, R. Leuzzi, L. Ristić, F. Cuperttino, Analytical and Simulation Fair Comparison of Three Level Si IGBT Based NPC Topologies and Two Level SiC MOSFET Based Topology for High Speed Drives, ENERGIES, Vol. 12, No. 23, pp. 1 - 16, Nov, 2019

Authors Jelena Lončarski, Vito Giuseppe Monopoli, Riccardo Leuzzi, Leposava Ristić, and Francesco Cuperttino
Year 2019
DOI 10.3390/en12234571
Journal ENERGIES
Impact factor 2.707 (M22)
Volumen 12
Number 23
Page from 1
Page to 16

Magnetizing Inductance Determination in a Six-phase Induction Machine

Bogdan Mihailo Brkovic, Leposava Bratimir Ristic, Mladen Vlajko Terzic, Ana V Stankovic, Zoran Mileta Lazarevic, Magnetizing Inductance Determination in a Six-phase Induction Machine, IEEE TRANSACTIONS ON ENERGY CONVERSION, pp. 1 - 12, Nov, 2018

Authors Bogdan Brković, Leposava Ristić, Mladen Terzić, Ana Stanković, and Zoran Lazarević
Year 2018
DOI 10.1109/TEC.2018.2881763
Journal IEEE TRANSACTIONS ON ENERGY CONVERSION
Impact factor 4.614 (M21)
Page from 1
Page to 12

Speed Controlled Belt Conveyors: Drives and Mechanical Considerations

M. Bebić, L. Ristić, Speed Controlled Belt Conveyors: Drives and Mechanical Considerations, ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING, Vol. 18, No. 1, pp. 51 - 60, Feb, 2018

Authors Milan Bebić and Leposava Ristić
Year 2018
DOI 10.4316/AECE.2018.01007
Journal ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING
Impact factor 0.699 (M23)
Volumen 18
Number 1
Page from 51
Page to 60

Implementation of Fuzzy Control to Improve Energy Efficiency of Variable Speed Bulk Material Transportation

L. Ristić, B. Jeftenić, Implementation of Fuzzy Control to Improve Energy Efficiency of Variable Speed Bulk Material Transportation, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, Vol. 59, No. 7, pp. 2959 - 2969, Jul, 2012

Authors Leposava Ristić and Borislav Jeftenić
Year 2012
DOI 10.1109/TIE.2011.2169639
Journal IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
Impact factor 5.165 (M21a)
Volumen 59
Number 7
Page from 2959
Page to 2969

Papers in journals outside the SCI list

ENERGY EFFICIENCY OF BELT CONVEYOR AT CONSTANT SPEED OPERATION

S. Štatkić, Đ. Vukić, Ž. Milkić, L. Ristić, ENERGY EFFICIENCY OF BELT CONVEYOR AT CONSTANT SPEED OPERATION, Mining and Metallurgy Engineering Bor, No. 3, pp. 33 - 43, 2015

Authors Saša Štatkić, Đukan Vukić, Žarko Milkić, and Leposava Ristić
Year 2015
DOI 10.5937/MMEB1503033S
Journal Mining and Metallurgy Engineering Bor
Number 3
Page from 33
Page to 43

Development of the algorithm for energy efficiency improvement of bulk material transport system

L. Ristić, M. Bebić, B. Jeftenić, Development of the algorithm for energy efficiency improvement of bulk material transport system, ELECTRONICS, Vol. 17, No. 1, pp. 30 - 39, Jun, 2013

Authors Leposava Ristić, Milan Bebić, and Borislav Jeftenić
Year 2013
Journal ELECTRONICS
Volumen 17
Number 1
Page from 30
Page to 39

Realization of System of Belt Conveyors Operation with Remote Control

B. Jeftenić, L. Ristić, M. Bebić, S. Štatkić, D. Jevtić, I. Mihailović, N. Rašić, Realization of System of Belt Conveyors Operation with Remote Control, INTEGRITET I VEK KONSTRUKCIJA, Vol. 10, No. 1, pp. 21 - 31, Apr, 2010

Authors Borislav Jeftenić, Leposava Ristić, Milan Bebić, Saša Štatkić, Dragan Jevtić, Ilija Mihailović, and Neša Rašić
Year 2010
Journal INTEGRITET I VEK KONSTRUKCIJA
Volumen 10
Number 1
Page from 21
Page to 31

Electrostatic Shaft Voltage at the Crack – Gas Compressor: the Phenomenon Analyses, Testing, Measuring and the Problem Solution

B. Jeftenić, L. Ristić, Electrostatic Shaft Voltage at the Crack – Gas Compressor: the Phenomenon Analyses, Testing, Measuring and the Problem Solution, INTERNATIONAL REVIEW OF ELECTRICAL ENGINEERING / IREE, Vol. 3, No. 1, pp. 23 - 32, Jan, 2008

Authors Borislav Jeftenić and Leposava Ristić
Year 2008
Journal INTERNATIONAL REVIEW OF ELECTRICAL ENGINEERING / IREE
Volumen 3
Number 1
Page from 23
Page to 32

Elektrostatički napon na vratilu krek-gas kompresora: analiza pojave, ispitivanje, merenje i predlog rešenja problema

B. Jeftenić, L. Ristić, M. Bebić, Elektrostatički napon na vratilu krek-gas kompresora: analiza pojave, ispitivanje, merenje i predlog rešenja problema, ENERGIJA, EKONOMIJA, EKOLOGIJA, No. 3-4, pp. 61 - 66, Dec, 2007

Authors Borislav Jeftenić, Leposava Ristić, and Milan Bebić
Year 2007
Journal ENERGIJA, EKONOMIJA, EKOLOGIJA
Number 3-4
Page from 61
Page to 66

New concept of electrical drives for paper and board machines based on energy efficiency principles

B. Jeftenić, S. Štatkić, M. Bebić, L. Ristić, New concept of electrical drives for paper and board machines based on energy efficiency principles, THERMAL SCIENCE, Vol. 10, No. 4, pp. 63 - 78, Apr, 2006

Authors Borislav Jeftenić, Saša Štatkić, Milan Bebić, and Leposava Ristić
Year 2006
Journal THERMAL SCIENCE
Volumen 10
Number 4
Page from 63
Page to 78

Dvostrano napajani asinhroni vetrogeneratori - pregled stanja

L. Ristić, Z. Stojiljković, B. Jeftenić, M. Bebić, Dvostrano napajani asinhroni vetrogeneratori - pregled stanja, ENERGIJA, EKONOMIJA, EKOLOGIJA, No. 2, pp. 224 - 228, Jun, 2005

Authors Leposava Ristić, Zoran Stojiljković, Borislav Jeftenić, and Milan Bebić
Year 2005
Journal ENERGIJA, EKONOMIJA, EKOLOGIJA
Number 2
Page from 224
Page to 228

Optimizacija potrošnje energije karton i papir mašine

B. Jeftenić, M. Bebić, L. Ristić, Optimizacija potrošnje energije karton i papir mašine, TERMOTEHNIKA, No. 1-4, pp. 39 - 48, 2003

Authors Borislav Jeftenić, Milan Bebić, and Leposava Ristić
Year 2003
Journal TERMOTEHNIKA
Number 1-4
Page from 39
Page to 48

Papers from international conferences

Interaction of grid and selected industrial drives with different front-end converter configurations

M. Đorđević, B. Ćeranić, K. Vukajlović, S. Pavlović, L. Ristić, M. Bebić, Interaction of grid and selected industrial drives with different front-end converter configurations, IX Regional Conference: Industrial Energy and Environmental Protection in the countries of South Eastern Europe - IEEP 2024, pp. 377 - 388, Society of Thermal Engineers of Serbia, Beograd, May, 2024

Authors Milan Đorđević, Balša Ćeranić, Kristian Vukajlović, Stefan Pavlović, Leposava Ristić, and Milan Bebić
Year 2024
Publisher Society of Thermal Engineers of Serbia
ISSN/ISBN 3024-1403
DOI 10.46793/IEEP24.377DJ
Page from 377
Page to 388

Energy optimization of industrial processes through advanced use of controlled electrical drives and power electronics

L. Ristić, Energy optimization of industrial processes through advanced use of controlled electrical drives and power electronics, IX Regional Conference Industrial energy and environmental protection in South Eastern Europe - IEEP 2024, pp. 340 - 376, Society of Thermal Engineers of Serbia, Belgrade, May, 2024

Authors Leposava Ristić
Year 2024
Publisher Society of Thermal Engineers of Serbia
ISSN/ISBN 3042-1403
DOI 10.46793/IEEP24.340R
Page from 340
Page to 376

Experimental evaluation of energy efficiency in industrial drives with induction and synchronous reluctance motors

B. Ćeranić, L. Ristić, M. Bebić, S. Pavlović, Experimental evaluation of energy efficiency in industrial drives with induction and synchronous reluctance motors, IX Regional Conference: Industrial Energy and Environmental Protection in the countries of South Eastern Europe - IEEP 2024, pp. 389 - 396, Society of Thermal Engineers of Serbia, Beograd, May, 2024

Authors Balša Ćeranić, Leposava Ristić, Milan Bebić, and Stefan Pavlović
Year 2024
Publisher Society of Thermal Engineers of Serbia
ISSN/ISBN 3024-1403
DOI 10.46793/IEEP24.389C
Page from 389
Page to 396

Testing of the pump under non-typical operating regimes

T. Pavlović, M.Bebić, L. Ristić, N. Janković, Testing of the pump under non-typical operating regimes, IX Regional Conference Industrial energy and environmental protection in South Eastern Europe - IEEP 2024, pp. 181 - 188, Society of Thermal Engineers of Serbia, Belgrade, May, 2024

Authors Tamara Pavlović, Milan Bebić, Leposava Ristić, and Novica Janković
Year 2024
Publisher Society of Thermal Engineers of Serbia
ISSN/ISBN 3042-1403
DOI 10.46793/IEEP24.181P
Page from 181
Page to 188

Solar Charger for Mobile Applications

Lazar Lukić, Milovan Majstorović, Leposava Ristić, Francisco de Paula Garcia Lopez, Solar Charger for Mobile Applications, 11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), pp. 1 - 6, ETRAN Society, Niš, Jun, 2024

Authors Lazar Lukić, Milovan Majstorović, Leposava Ristić, and Francisco de Paula Garcia Lopez
Year 2024
Publisher ETRAN Society
DOI 10.1109/IcETRAN62308.2024.10645098
Page from 1
Page to 6

Encoderless Predictive Speed and Torque Control of an Induction Motor

E. Zerdali, M. Rivera, P. Zanchetta, P. Wheeler, L. Ristić, Encoderless Predictive Speed and Torque Control of an Induction Motor, 22nd International Symposium on Power Electronics (Ee2023), pp. 01 - 06, Power Electronics Society Serbia, Novi Sad, Serbia, Oct, 2023

Authors Emrach Zerdali, Marco Rivera, Pericle Zanchetta, Patrick Wheeler, and Leposava Ristić
Year 2023
Publisher Power Electronics Society Serbia
DOI 10.1109/Ee59906.2023.10346148.
Page from 01
Page to 06

Enhancing Stability of Grid-Following Inverter for Renewables

J. Gluščević, Ž. Janda, J. Dragosavac, L. Ristić, Enhancing Stability of Grid-Following Inverter for Renewables, 22nd International Symposium on Power Electronics (Ee2023), pp. 1 - 6, Power Electronics Society, Serbia, Novi Sad, Serbia, Oct, 2023

Authors Jovana Gluščević, Žarko Janda, Jasna Dragosavac, and Leposava Ristić
Year 2023
Publisher Power Electronics Society, Serbia
DOI 10.1109/Ee59906.2023.10346158.
Page from 1
Page to 6

Three-Phase Boost Rectifier Control Implemented Using Hardware-in-the-Loop

M. Majstorović, B. Brković, N. Vojvodić, L. Ristić, A. Stanković, Three-Phase Boost Rectifier Control Implemented Using Hardware-in-the-Loop, 2023 IEEE Belgrade PowerTech, pp. 01 - 06, IEEE, Belgrade, Serbia, Jun, 2023

Authors Milovan Majstorović, Bogdan Brković, Nikola Vojvodić, Leposava Ristić, and Ana Stanković
Year 2023
Publisher IEEE
ISSN/ISBN 978-1-6654-8778-8
DOI 10.1109/PowerTech55446.2023.10202862
Page from 01
Page to 06

Hardware-in-the-Loop Simulation of a Virtual Synchronous Motor

M. Tanasić, B. Brković, M. Majstorović, L. Ristić, Hardware-in-the-Loop Simulation of a Virtual Synchronous Motor, 22nd International Symposium on Power Electronics (Ee2023), pp. 1 - 6, Power Electronics Society, Serbia, Novi Sad, Serbia, Oct, 2023

Authors Mihailo Tanasić, Bogdan Brković, Milovan Majstorović, and Leposava Ristić
Year 2023
Publisher Power Electronics Society, Serbia
DOI 10.1109/Ee59906.2023.10346157.
Page from 1
Page to 6

Modal analysis and sound field modeling of a permanent magnet axial flux machine with one stator and two rotors

M. Nikolić, M. Ivanović, L. Ristić, M. Terzić, D. Šumarac Pavlović, M. Bjelić, Modal analysis and sound field modeling of a permanent magnet axial flux machine with one stator and two rotors, 7th International Symposium on Environment-Friendly Energies and Applications (EFEA 2022), pp. 1 - 6, IEEE Xplore, Bagatelle, Moka,Mauritius, Dec, 2022

Authors Mateja Nikolić, Mateja Ivanović, Leposava Ristić, Mladen Terzić, Dragana Šumarac Pavlović, and Miloš Bjelić
Year 2022
Publisher IEEE Xplore
Page from 1
Page to 6

Design and Performance Study of a Large-Scale Brushless Doubly Fed Reluctance Generator

T. Taluo, L. Ristić, B. Brković, M. Terzić, Design and Performance Study of a Large-Scale Brushless Doubly Fed Reluctance Generator, 7th International Symposium on Environment-Friendly Energies and Applications (EFEA 2022), pp. 1 - 6, IEEE Xplore, Mauritius, Dec, 2022

Authors Taufik Taluo, Leposava Ristić, Bogdan Brković, and Mladen Terzić
Year 2022
Publisher IEEE Xplore
Page from 1
Page to 6

Comparation between PI and Model Predictive Control of Two Mass Resonant Mechanical System

S. Vukojičić, L. Ristić, G. Kvaščev, Comparation between PI and Model Predictive Control of Two Mass Resonant Mechanical System, 7th International Symposium on Environment-Friendly Energies and Applications (EFEA 2022), pp. 1 - 6, IEEE Xplore, Mauritius, Dec, 2022

Authors Slobodan Vukojičić, Leposava Ristić, and Goran Kvaščev
Year 2022
Publisher IEEE Xplore
Page from 1
Page to 6

Model Predictive Control of Two Mass Resonant Mechanical System Optimized by Neural Network

S. Vukojičić, L. Ristić, G.Kvaščev, Model Predictive Control of Two Mass Resonant Mechanical System Optimized by Neural Network, 7th International Symposium on Environment-Friendly Energies and Applications (EFEA 2022), pp. 1 - 6, IEEE Xplore, Mauritius, Dec, 2022

Authors Slobodan Vukojičić, Leposava Ristić, and Goran Kvaščev
Year 2022
Publisher IEEE Xplore
Page from 1
Page to 6

Indirect Field-Oriented Control of an Asymmetrical Six-Phase Induction Motor Drive

S. Subotić, L. Ristić, Indirect Field-Oriented Control of an Asymmetrical Six-Phase Induction Motor Drive, 7th International Symposium on Environment-Friendly Energies and Applications (EFEA 2022), pp. 1 - 6, IEEE Xplore, Mauritius, Dec, 2022

Authors Stefan Subotić and Leposava Ristić
Year 2022
Publisher IEEE Xplore
Page from 1
Page to 6

Steady State analysis of Brushless Doubly Fed Reluctance Generator

T. Taluo, L. Ristić, M. Jovanović, Steady State analysis of Brushless Doubly Fed Reluctance Generator, 7th International Symposium on Environment-Friendly Energies and Applications (EFEA 2022), pp. 1 - 6, IEEE Xplore, Mauritius, Dec, 2022

Authors Taufik Taluo, Leposava Ristić, and Milutin Jovanović
Year 2022
Publisher IEEE Xplore
Page from 1
Page to 6

Induction Machine Driven Pump Applied as Turbine in Micro-hydro Power Plants

M. Nikolić, D. Mršević, L. Ristić, Đ. Čantrak, N. Janović, Induction Machine Driven Pump Applied as Turbine in Micro-hydro Power Plants, 6th International Symposium on Environment-Friendly Energies and Applications (EFEA), pp. 1 - 6, IEEE Xplore, Sofia, Bulgaria, Mar, 2021

Authors Mateja Nikolić, Dejan Mršević, Leposava Ristić, Đorđe Čantrak, and Novica Janović
Year 2021
Publisher IEEE Xplore
DOI 10.1109/EFEA49713.2021.9406236.
Page from 1
Page to 6

Extended SVM for direct matrix converter based drive operating under unbalanced grid condition

L. Stanić, L. Ristić, M. Bebić, M. Rivera, Extended SVM for direct matrix converter based drive operating under unbalanced grid condition, 21st International Symposium on Power Electronics, pp. 1 - 6, Društvo za energetsku elektroniku, Novi Sad, Oct, 2021

Authors Luka Stanić, Leposava Ristić, Milan Bebić, and Marco Rivera
Year 2021
Publisher Društvo za energetsku elektroniku
DOI 10.1109/Ee53374.2021.9628195
Page from 1
Page to 6

Hysteresis Control of the Pseudo Boost PFC Converter

A. Lekić, M. Majstorović, L. Ristić, D. Stipanović, Hysteresis Control of the Pseudo Boost PFC Converter, 2020 IEEE 29th International Symposium on Industrial Electronics (ISIE), pp. 731 - 735, Delft University of Technology, Delft, The Netherlands., Jun, 2020

Authors Aleksandra Lekić, Milovan Majstorović, Leposava Ristić, and Dušan Stipanović
Year 2020
DOI 10.1109/ISIE45063.2020.9152581
Page from 731
Page to 735

Energy efficient control of variable-speed induction motor drives based on Particle Swarm Optimization

A. Seizović, N. Vojvodić, L. Ristić, M. Bebić, Energy efficient control of variable-speed induction motor drives based on Particle Swarm Optimization, 2020 International Symposium on Industrial Electronics and Applications (INDEL), pp. 1 - 6, Banja Luka, Bosnia and Herzegovina, Nov, 2020

Authors Aleksa Seizović, Nikola Vojvodić, Leposava Ristić, and Milan Bebić
Year 2020
DOI 10.1109/INDEL50386.2020.9266171
Page from 1
Page to 6

Voltage Oriented Control Design for Brushless Doubly-Fed Reluctance Machines

T. Taluo, L. Ristić, M. Jovanović, Voltage Oriented Control Design for Brushless Doubly-Fed Reluctance Machines, 7th international conference IcETRAN 2020, pp. 1 - 6, Novi Sad, Serbia, Sep, 2020

Authors Taufik Taluo, Leposava Ristić, and Milutin Jovanović
Year 2020
Page from 1
Page to 6

Performance analysis of brushless doubly fed reluctance machines

T. Taluo, L. Ristić, M. Jovanović, Performance analysis of brushless doubly fed reluctance machines, XX International Symposium on Power Electronics - Ee 2019, pp. 1 - 6, Društvo za energetsku elektroniku Novi Sad, Novi Sad, Oct, 2019

Authors Taufik Taluo, Leposava Ristić, and Milutin Jovanović
Year 2019
Publisher Društvo za energetsku elektroniku Novi Sad
ISSN/ISBN 978-86-6022-218-5
DOI 10.1109/PEE.2019.8923437
Page from 1
Page to 6

Review of MPC Techniques for MMCs

Milovan Majstorović, Marco Rivera, Leposava Ristić, Review of MPC Techniques for MMCs, XX International Symposium on Power Electronics - Ee 2019, pp. 1 - 6, Društvo za energetsku elektroniku Novi Sad, Novi Sad, Oct, 2019

Authors Milovan Majstorović, Marco Rivera, and Leposava Ristić
Year 2019
Publisher Društvo za energetsku elektroniku Novi Sad
ISSN/ISBN 978-86-6022-218-5
DOI 10.1109/PEE.2019.8923191
Page from 1
Page to 6

Passive, active and hybrid filters as a part of the energy efficient electrical drives curriculum

S. Vukojčić, S. Pavlović, L. Ristić, Passive, active and hybrid filters as a part of the energy efficient electrical drives curriculum, XX International Symposium on Power Electronics - Ee 2019, pp. 1 - 6, Društvo za energetsku elektroniku Novi Sad, Novi Sad, Oct, 2019

Authors Slobodan Vukojčić, Stefan Pavlović, and Leposava Ristić
Year 2019
Publisher Društvo za energetsku elektroniku Novi Sad
ISSN/ISBN 978-86-6022-218-5
DOI 10.1109/PEE.2019.8923030
Page from 1
Page to 6

Electrical Drives with Active Rectifiers Connected to Distorted Utility Grid

L. Ristić, B. Brković, M. Majstorović, U. Milović, T. Taluo, M. Bebić, Electrical Drives with Active Rectifiers Connected to Distorted Utility Grid, 5th International Symposium on Environment Friendly Energies and Applications, EFEA 2018, Rome, Italy, Sep, 2018

Authors Leposava Ristić, Bogdan Brković, Milovan Majstorović, Uroš Milović, Taufik Taluo, and Milan Bebić
Year 2018
DOI 10.1109/EFEA.2018.8617093

Application of the Microprocessor-Based MV Protective Equipment for Energy Management Purposes

R. Antić, D. Naumović, M. Bebić, L. Ristić, Application of the Microprocessor-Based MV Protective Equipment for Energy Management Purposes, 5th Edition of the International Symposium “Environment-Friendly Energy and Applications - EFEA 2018, pp. 1 - 6, FAculty of Civil and Industrial Engineering Sapienza University of Rome, Rome, Italy, Sep, 2018

Authors Radoslav Antić, Dragana Naumović, Milan Bebić, and Leposava Ristić
Year 2018
Publisher FAculty of Civil and Industrial Engineering Sapienza University of Rome
DOI 10.1109/EFEA.2018.8617092
Page from 1
Page to 6

Application of Mobile Solar OFF-grid Generator in Irrigation System - Case Study

M. Majstorović, Ž. Despotović, L. Ristić, Application of Mobile Solar OFF-grid Generator in Irrigation System - Case Study, 19th International Symposium on Power Electronics Ee 2017, pp. 1 - 1, Novi Sad, Serbia, Oct, 2017

Authors Milovan Majstorović, Željko Despotović, and Leposava Ristić
Year 2017
ISSN/ISBN 978-86-7892-980-9
Page from 1
Page to 1

Constant Switching Frequency Control of a Three Phase PWM Boost Rectifier under Extreme Unbalanced Conditions

B. Brković, L. Ristić, A. Stanković, Constant Switching Frequency Control of a Three Phase PWM Boost Rectifier under Extreme Unbalanced Conditions, 4th International Symposium on Environment Friendly Energies and Applications (EFEA), Beograd, Sep, 2016

Authors Bogdan Brković, Leposava Ristić, and Ana Stanković
Year 2016
ISSN/ISBN 978-1-5090-0748-6

Model Predictive Control of a Three Phase PWM Boost Rectifier under Extreme Unbalanced Conditions

B. Brković, L. Ristić, A. Stanković, Model Predictive Control of a Three Phase PWM Boost Rectifier under Extreme Unbalanced Conditions, 4th International Symposium on Environment Friendly Energies and Applications (EFEA), Beograd, Sep, 2016

Authors Bogdan Brković, Leposava Ristić, and Ana Stanković
Year 2016
ISSN/ISBN 978-1-5090-0748-6

Advanced control algorithm of bucket wheel excavator operation according to the criterion of desired capacity

N. Rašić, B. Jeftenić, M. Bebić, S. Štatkić, L. Ristić, Advanced control algorithm of bucket wheel excavator operation according to the criterion of desired capacity, 13th International Symposium Continuous Surface Mining, ISCSM 2016, Belgrade, Serbia, Sep, 2016

Authors Neša Rašić, Borislav Jeftenić, Milan Bebić, Saša Štatkić, and Leposava Ristić
Year 2016
ISSN/ISBN 978-86-83497-23-2

Hardware in the Loop Model for Irregular Conditions in Tension Leveler Applications

N. Tošić, A. Bukvić, V. Dimitrijević, M. Bebić, L. Ristić, Hardware in the Loop Model for Irregular Conditions in Tension Leveler Applications, Environment-Friendly Energies and Applications EFEA 2016, Belgrade, Serbia, Sep, 2016

Authors Nikola Tošić, Aleksandar Bukvić, Vladan Dimitrijević, Milan Bebić, and Leposava Ristić
Year 2016
ISSN/ISBN 978-1-5090-0748-6

Improved Efficiency of Bucket Wheel Excavator Operation with Advances in the Control Algorithm

N. Rašić, M. Bebić, L. Ristić, I. Mihailović, D. Jevtić, S. Štatkić, B. Jeftenić, Improved Efficiency of Bucket Wheel Excavator Operation with Advances in the Control Algorithm, Environment-Friendly Energies and Applications EFEA 2016, Sep, 2016

Authors Neša Rašić, Milan Bebić, Leposava Ristić, Ilija Mihailović, Dragan Jevtić, Saša Štatkić, and Borislav Jeftenić
Year 2016
ISSN/ISBN 978-1-5090-0748-6

NEW CONCEPT OF POWER GRIDS AS CYBER PHYSICAL SYSTEMS EMBEDDING POWER ELECTRONIC DEVICES

L. Ristić, B. Jeftenić, A. Nikolić, Ž. Janda, NEW CONCEPT OF POWER GRIDS AS CYBER PHYSICAL SYSTEMS EMBEDDING POWER ELECTRONIC DEVICES, 18th International Symposium on Power Electronics - Ee2015, Novi Sad, pp. 1 - 5, Društvo za Energetsku elektroniku, Novi Sad, 2015

Authors Leposava Ristić, Borislav Jeftenić, Aleksandar Nikolić, and Žarko Janda
Year 2015
Publisher Društvo za Energetsku elektroniku
ISSN/ISBN 978-86-7892-757-7
Page from 1
Page to 5

MODELING AND CONTROL STRATEGIES FOR LOAD SHARING IN STRIP PROCESSING APPLICATION

N. Tošić, Z. Rangelov, M. Bebić, L. Ristić, V. Dimitrijević, V. Radosavljević, S. Mehandžić, MODELING AND CONTROL STRATEGIES FOR LOAD SHARING IN STRIP PROCESSING APPLICATION, 18th International Symposium on Power Electronics - Ee2015, Novi Sad, pp. 1 - 6, Društvo za Energetsku elektroniku, Novi Sad, 2015

Authors Nikola Tošić, Zdravko Rangelov, Milan Bebić, Leposava Ristić, Vladan Dimitrijević, Vladimir Radosavljević, and Stevan Mehandžić
Year 2015
Publisher Društvo za Energetsku elektroniku
ISSN/ISBN 978-86-7892-757-7
Page from 1
Page to 6

POWER CONVERTERS ON MINING MACHINES

B. Jeftenić, M. Bebić, I. Mihailović, N. Rašić, S. Štatkić, S. Aleksandrović, I. Jeftenić, D. Jevtić, L. Ristić, POWER CONVERTERS ON MINING MACHINES, 18th International Symposium on Power Electronics - Ee2015, Novi Sad, pp. 1 - 5, Društvo za Energetsku elektroniku, Novi Sad, Oct, 2015

Authors Borislav Jeftenić, Milan Bebić, Ilija Mihailović, Neša Rašić, Saša Štatkić, Snežana Aleksandrović, Ilija Jeftenić, Dragan Jevtić, and Leposava Ristić
Year 2015
Publisher Društvo za Energetsku elektroniku
ISSN/ISBN 978-86-7892-757-7
Page from 1
Page to 5

Electrical Motor Testing Station with Electromagnetic Load Emulator: An Overview of Design, Construction and Calibration with Examples of Use

M. Rosić, M. Božić, M. Bjekić, L. Ristić, Electrical Motor Testing Station with Electromagnetic Load Emulator: An Overview of Design, Construction and Calibration with Examples of Use, 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), pp. 371 - 376, Paris, France, Nov, 2014

Authors Marko Rosić, Miloš Božić, Miroslav Bjekić, and Leposava Ristić
Year 2014
Page from 371
Page to 376

Energy Efficiency in Paper Industry - Study of Two Cases

L. Ristić, I. Mihailović, I. Jeftenić, A. Nikolić, M. Bebić, Energy Efficiency in Paper Industry - Study of Two Cases, 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), pp. 359 - 364, Paris, France, Nov, 2014

Authors Leposava Ristić, Ilija Mihailović, Ilija Jeftenić, Aleksandar Nikolić, and Milan Bebić
Year 2014
Page from 359
Page to 364

Control of the Main Working Axes of Bucket Wheel Excavators According to the Criterion of Desired Capacity

N. Rašić, M. Bebić, L. Ristić, B. Jeftenić, S. Štatkić, Control of the Main Working Axes of Bucket Wheel Excavators According to the Criterion of Desired Capacity, IECON 2013, pp. 3431 - 3436, IEEE Catalog Number: CFP13IEC-USB, Vienna; Austria, Nov, 2013

Authors Neša Rašić, Milan Bebić, Leposava Ristić, Borislav Jeftenić, and Saša Štatkić
Year 2013
Publisher IEEE Catalog Number: CFP13IEC-USB
ISSN/ISBN 978-1-4799-0223-1
Page from 3431
Page to 3436

Controlled multi motor drives of high power belt conveyors: Practical experiences during the exploitation of the system on open pit mine

L. Ristić, M. Bebić, D. Jevtić, B. Jeftenić, S. Štatkić, A. Nikolić, Controlled multi motor drives of high power belt conveyors: Practical experiences during the exploitation of the system on open pit mine, 13th International Conference on Electric Power Systems, High Voltages, Electric Machines (POWER '13), pp. 65 - 70, Recent Advances in Electrical Engineering Series 22, WSEAS Press, Chania, Crete Island, Greece, Aug, 2013

Authors Leposava Ristić, Milan Bebić, Dragan Jevtić, Borislav Jeftenić, Saša Štatkić, and Aleksandar Nikolić
Year 2013
Publisher Recent Advances in Electrical Engineering Series 22, WSEAS Press
ISSN/ISBN 1790-5117/978-960-474-328-5
Page from 65
Page to 70

Fuzzy speed control of belt conveyor system to improve energy efficiency

L. Ristić, M. Bebić, D. Jevtić, I. Mihailović, S. Štatkić, N. Rašić, B. Jeftenić, Fuzzy speed control of belt conveyor system to improve energy efficiency, 15th International Power Electronics and Motion Control Conference EPE-PEMC 2012, pp. DS2a.9-1 - DS2a.9-7, University of Novi Sad, Faculty of Technical Sciences, Novi Sad, Serbia EPE Association, Brussels,Belgium IEEE-PELS, USA, Novi Sad, Serbia, Sep, 2012

Authors Leposava Ristić, Milan Bebić, Dragan Jevtić, Ilija Mihailović, Saša Štatkić, Neša Rašić, and Borislav Jeftenić
Year 2012
Publisher University of Novi Sad, Faculty of Technical Sciences, Novi Sad, Serbia EPE Association, Brussels,Belgium IEEE-PELS, USA
ISSN/ISBN 978-1-4673-1971-3
Page from DS2a.9-1
Page to DS2a.9-7

Drives and Control System for Paper-Board Cross Cutter

M. Bebić, N. Rašić, S. Štatkić, L. Ristić, D. Jevtić, I. Mihailović, B. Jeftenić, Drives and Control System for Paper-Board Cross Cutter, 15th International Power Electronics and Motion Control Conference EPE-PEMC 2012, pp. LS6c.3-1 - LS6c.3-8, University of Novi Sad, Faculty of Technical Sciences, Novi Sad, Serbia EPE Association, Brussels,Belgium IEEE-PELS, USA, Novi Sad, Serbia, Sep, 2012

Authors Milan Bebić, Neša Rašić, Saša Štatkić, Leposava Ristić, Dragan Jevtić, Ilija Mihailović, and Borislav Jeftenić
Year 2012
Publisher University of Novi Sad, Faculty of Technical Sciences, Novi Sad, Serbia EPE Association, Brussels,Belgium IEEE-PELS, USA
ISSN/ISBN 978-1-4673-1971-3
Page from LS6c.3-1
Page to LS6c.3-8

Controlled multimotor drive for crawler transport in extreme operating conditions

S. Štatkić, N. Rašić, D. Jevtić, M. Bebić, L. Ristić, B. Jeftenić, Controlled multimotor drive for crawler transport in extreme operating conditions, International scientific conference UNITECH ’12, pp. 192 - 197, Technical University of Gabrovo, Bulgaria, Gabrovo, Bulgaria, Nov, 2012

Authors Saša Štatkić, Neša Rašić, Dragan Jevtić, Milan Bebić, Leposava Ristić, and Borislav Jeftenić
Year 2012
Publisher Technical University of Gabrovo, Bulgaria
ISSN/ISBN 1313-230X
Page from 192
Page to 197

Development of the algorithm for speed control of belt conveyor system on open pit mines

L. Ristić, M. Bebić, D. Jevtić, I. Mihailović, N. Rašić, B. Jeftenić, S. Štatkić, Development of the algorithm for speed control of belt conveyor system on open pit mines, IX International Symposium on Industrial Electronics - INDEL 2012, pp. 239 - 246, Faculty of Electrical Engineering University of Banja Luka, Banja Luka, Bosnia and Herzegovina, Nov, 2012

Authors Leposava Ristić, Milan Bebić, Dragan Jevtić, Ilija Mihailović, Neša Rašić, Borislav Jeftenić, and Saša Štatkić
Year 2012
Publisher Faculty of Electrical Engineering University of Banja Luka
ISSN/ISBN 978-99955-46-14-4
Page from 239
Page to 246

Controlled two-crawler travel drives on open pit mine

N. Rašić, S. Štatkić, M. Bebić, L. Ristić, B. Jeftenić, Controlled two-crawler travel drives on open pit mine, XVI International Symposium on Power Electronics – Ee 2011, pp. 1 - 5, Power Electronics Society, Republic of Serbia, Novi Sad, Serbia, Oct, 2011

Authors Neša Rašić, Saša Štatkić, Milan Bebić, Leposava Ristić, and Borislav Jeftenić
Year 2011
Publisher Power Electronics Society, Republic of Serbia
ISSN/ISBN 978-86-7892-356-2
Page from 1
Page to 5

Improving energy efficiency of belt conveyors system

D. Jevtić, I. Mihailović, L. Ristić, M. Bebić, S. Štatkić, N. Rašić, B. Jeftenić, Improving energy efficiency of belt conveyors system, XVI International Symposium on Power Electronics – Ee 2011, pp. 1 - 5, Power Electronics Society, Republic of Serbia, Novi Sad, Serbia, Oct, 2011

Authors Dragan Jevtić, Ilija Mihailović, Leposava Ristić, Milan Bebić, Saša Štatkić, Neša Rašić, and Borislav Jeftenić
Year 2011
Publisher Power Electronics Society, Republic of Serbia
ISSN/ISBN 978-86-7892-356-2
Page from 1
Page to 5

Bulk Material Transportation System in Open Pit Mines with Improved Energy Efficiency

L. Ristić, M. Bebić, S. Štatkić, I. Mihailović, D. Jevtić, B. Jeftenić, Bulk Material Transportation System in Open Pit Mines with Improved Energy Efficiency, 15th WSEAS International Conference on Systems (Part of the 15th WSEAS CSCC Multiconfrence), pp. 327 - 332, WSEAS (World Scientific and Engineering Academy and Society), Corfu Island, Greec, Jul, 2011

Authors Leposava Ristić, Milan Bebić, Saša Štatkić, Ilija Mihailović, Dragan Jevtić, and Borislav Jeftenić
Year 2011
Publisher WSEAS (World Scientific and Engineering Academy and Society)
ISSN/ISBN 1792-4235/978-1-61804-023-7
Page from 327
Page to 332

Realization of rewinder with sensorless tension control

M. Bebić, N. Rašić, L. Ristić, D. Jevtić, I. Mihailović, S. Štatkić, B. Jeftenić, Realization of rewinder with sensorless tension control, XVI International Symposium on Power Electronics – Ee 2011, pp. 1 - 6, Power Electronics Society, Republic of Serbia, Novi Sad, Serbia, Oct, 2011

Authors Milan Bebić, Neša Rašić, Leposava Ristić, Dragan Jevtić, Ilija Mihailović, Saša Štatkić, and Borislav Jeftenić
Year 2011
Publisher Power Electronics Society, Republic of Serbia
ISSN/ISBN 978-86-7892-356-2
Page from 1
Page to 6

Computer Integrated System for Control of Multi-Motor Crawler Drive on Open Pit Mining Machines

S. Štatkić, M. Bebić, N. Rašić, D. Jevtić, L. Ristić, I. Mihailović, B. Jeftenić, Computer Integrated System for Control of Multi-Motor Crawler Drive on Open Pit Mining Machines, 4th International Mining Congress BALKANMINE 2011, pp. 649 - 655, University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Mining and Geotechnology, Slovenia, Ljubljana, Slovenia, Oct, 2011

Authors Saša Štatkić, Milan Bebić, Neša Rašić, Dragan Jevtić, Leposava Ristić, Ilija Mihailović, and Borislav Jeftenić
Year 2011
Publisher University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Mining and Geotechnology, Slovenia
ISSN/ISBN 978-99955-46-14-4
Page from 649
Page to 655

Energy efficiency in transportation of bulk material with frequency controlled drives

B. Jeftenić, I. Mihailović, M. Bebić, L. Ristić, D. Jevtić, N. Rašić, S. Štatkić, Energy efficiency in transportation of bulk material with frequency controlled drives, 14th International Power Electronics and Motion Control Conference EPE-PEMC 2010, pp. T5 105 - 113, EPE-PEMC Council - Secretariat in Budapest in co-operation with European Power Electronics and Drives Association - Secretariat in Brussels, Ohrid, Macedonia, Sep, 2010

Authors Borislav Jeftenić, Ilija Mihailović, Milan Bebić, Leposava Ristić, Dragan Jevtić, Neša Rašić, and Saša Štatkić
Year 2010
Publisher EPE-PEMC Council - Secretariat in Budapest in co-operation with European Power Electronics and Drives Association - Secretariat in Brussels
ISSN/ISBN 978-1-4244-7854-5
Page from T5 105
Page to 113

Optimal Utilization of the Bulk Material Transportation System based on Speed Controlled Drives

B. Jeftenić, L. Ristić, M. Bebić, S. Štatkić, I. Mihailović, D. Jevtić, Optimal Utilization of the Bulk Material Transportation System based on Speed Controlled Drives, XIX International Conference on Electrical Machines ICEM 2010, pp. 1 - 6, Institute of Electrical and Electronics Engineers ( IEEE ), Rome, Italy, Sep, 2010

Authors Borislav Jeftenić, Leposava Ristić, Milan Bebić, Saša Štatkić, Ilija Mihailović, and Dragan Jevtić
Year 2010
Publisher Institute of Electrical and Electronics Engineers ( IEEE )
ISSN/ISBN 978-1-4244-4175-4
Page from 1
Page to 6

Universal Control Block for Paper Machine Drives

B. Jeftenić, M. Bebić, L. Ristić, S. Štatkić, Universal Control Block for Paper Machine Drives, IEEE International Conference on Industrial Technology ICIT 2010, pp. 445 - 450, IEEE Institute of Electrical and Electronics Engineers, Vi a del Mar, Chile, 2010

Authors Borislav Jeftenić, Milan Bebić, Leposava Ristić, and Saša Štatkić
Year 2010
Publisher IEEE Institute of Electrical and Electronics Engineers
ISSN/ISBN 978-1-4244-5695-6
DOI 10.1109/ICIT.2010.5472759
Page from 445
Page to 450

Basic concept of remote control of multi motor drive of belt conveyor with uniform load distribution

B. Jeftenić, M. Bebić, L. Ristić, D. Jevtić, I. Mihailović, N. Rašić, S. Štatkić, Basic concept of remote control of multi motor drive of belt conveyor with uniform load distribution, 15th International Conference on Electrical Drives and Power Electronics, pp. 1 - 6, Croatian Society for Communications, Computing, Electronics, Measurement and Control, FER Faculty of Electrical Engineering and Computing, University of Zagreb , FEI TU Technical University of Kosice , SES Slovak Electrotechnical Society, Dubrovnik, Croatia, Oct, 2009

Authors Borislav Jeftenić, Milan Bebić, Leposava Ristić, Dragan Jevtić, Ilija Mihailović, Neša Rašić, and Saša Štatkić
Year 2009
Publisher Croatian Society for Communications, Computing, Electronics, Measurement and Control, FER Faculty of Electrical Engineering and Computing, University of Zagreb , FEI TU Technical University of Kosice , SES Slovak Electrotechnical Society
Page from 1
Page to 6

Controlled Induction Motor Drives Supplied by Frequency Converters on Belt Conveyors – Modeling and Commissioning

B. Jeftenić, L. Ristić, M. Bebić, S. Štatkić, Controlled Induction Motor Drives Supplied by Frequency Converters on Belt Conveyors – Modeling and Commissioning, IEEE-IECON 2009 - The 35th Annual Conference of the IEEE Industrial Electronics Society, pp. 1063 - 1068, IEEE Industrial Electronics Society, Porto, Portugal, Nov, 2009

Authors Borislav Jeftenić, Leposava Ristić, Milan Bebić, and Saša Štatkić
Year 2009
Publisher IEEE Industrial Electronics Society
ISSN/ISBN 978-1-4244-4648-3
DOI 10.1109/IECON.2009.5414671
Page from 1063
Page to 1068

Papers from domestic conferences

UPRAVLJANJE AKTIVNIM ISPRAVLJAČEM KAO VIRTUELNOM SINHRONOM MAŠINOM

J. Gluščević, M. Tanasić, L. Ristić, M. Bebić, UPRAVLJANJE AKTIVNIM ISPRAVLJAČEM KAO VIRTUELNOM SINHRONOM MAŠINOM, VIII Regionalna konferencija - Industrijska energetika i zaštita životne sredine u zemljama jugoistočne Evrope IEEP'22, pp. 1 - 11, Društvo termičara Srbije, Beograd, Nov, 2022

Authors Jovana Gluščević, Mihailo Tanasić, Leposava Ristić, and Milan Bebić
Year 2022
Publisher Društvo termičara Srbije
Page from 1
Page to 11

ENERGETSKI PREGLED I MERE ZA POVEĆANJE ENERGETSKE EFIKASNOSTI INDUSTRIJSKIH POSTROJENJA

T. Stepanović, N. Kijanović, L. Ristić, M. Stamenić, S. Marković, ENERGETSKI PREGLED I MERE ZA POVEĆANJE ENERGETSKE EFIKASNOSTI INDUSTRIJSKIH POSTROJENJA, VIII regionalna konferencija “Industrijska energetika i zaštita životne sredine u zemljama Jugoistočne Evrope”, IEEP ‘22, pp. 1 - 12, Društvo termičara Srbije, Beograd, Nov, 2022

Authors Tomislav Stepanović, Nikola Kijanović, Leposava Ristić, Mirjana Stamenić, and Saša Marković
Year 2022
Publisher Društvo termičara Srbije
Page from 1
Page to 12

PRIMENA TIPIČNIH STRATEGIJA UPRAVLJANJA POGONOM SA SINHRONIM MOTOROM SA STALNIM MAGNETIMA U CILJU POSTIZANJA OPTIMALNIH PERFORMANSI

U. Milošević, L. Ristić, M. Terzić, PRIMENA TIPIČNIH STRATEGIJA UPRAVLJANJA POGONOM SA SINHRONIM MOTOROM SA STALNIM MAGNETIMA U CILJU POSTIZANJA OPTIMALNIH PERFORMANSI, VIII regionalna konferencija “Industrijska energetika i zaštita životne sredine u zemljama Jugoistočne Evrope”, IEEP ‘22, pp. 1 - 12, Društvo termičara Srbije, Beograd, Nov, 2022

Authors Uroš Milošević, Leposava Ristić, and Mladen Terzić
Year 2022
Publisher Društvo termičara Srbije
Page from 1
Page to 12

ANALIZA PRIMENE ENERGETSKIH FILTARA I DIGITALNE OBRADE SIGNALA KOD AKTIVNOG ISPRAVLJAČA

N. Milošević, L. Ristić, J. Ćertić, ANALIZA PRIMENE ENERGETSKIH FILTARA I DIGITALNE OBRADE SIGNALA KOD AKTIVNOG ISPRAVLJAČA, VIII regionalna konferencija “Industrijska energetika i zaštita životne sredine u zemljama Jugoistočne Evrope”, IEEP ‘22, pp. 1 - 12, Društvo termičara Srbije, Beograd, Nov, 2022

Authors Nemanja Milošević, Leposava Ristić, and Jelena Ćertić
Year 2022
Publisher Društvo termičara Srbije
Page from 1
Page to 12

Performance analysis of doubly fed induction wind generators

T. Taluo, L. Ristić, M. Jovanović, Performance analysis of doubly fed induction wind generators, VII Regionalna konferencija - Industrijska energetika i zaštita životne sredine u zemljama jugoistočne Evrope, pp. 336 - 347, Društvo termičara Srbije, Zlatibor, Jun, 2019

Authors Taufik Taluo, Leposava Ristić, and Milutin Jovanović
Year 2019
Publisher Društvo termičara Srbije
ISSN/ISBN 978-86-7877-033-3
Page from 336
Page to 347

Energy optimal control of induction motor drive in pump applications

M. Nikolić, L. Ristić, M. Bebić, Energy optimal control of induction motor drive in pump applications, VII Regionalna konferencija - Industrijska energetika i zaštita životne sredine u zemljama jugoistočne Evrope, pp. 355 - 365, Društvo termičara Srbije, Zlatibor, Jun, 2019

Authors Mateja Nikolić, Leposava Ristić, and Milan Bebić
Year 2019
Publisher Društvo termičara Srbije
ISSN/ISBN 978-86-7877-033-3
Page from 355
Page to 365

Energy optimal control of an induction motor drive based on PSO algorithm

A. Seizović, L. Ristić, M. Bebić, Energy optimal control of an induction motor drive based on PSO algorithm, VII Regionalna konferencija - Industrijska energetika i zaštita životne sredine u zemljama jugoistočne Evrope, pp. 374 - 385, Društvo termičara Srbije, Zlatibor, Jun, 2019

Authors Aleksa Seizović, Leposava Ristić, and Milan Bebić
Year 2019
Publisher Društvo termičara Srbije
ISSN/ISBN 978-86-7877-033-3
Page from 374
Page to 385

Energy efficient industrial synchronous motor drives

N. Vojvodić, L. Ristić, M. Bebić, Energy efficient industrial synchronous motor drives, VII Regionalna konferencija - Industrijska energetika i zaštita životne sredine u zemljama jugoistočne Evrope, pp. 385 - 394, Društvo termičara Srbije, Zlatibor, Jun, 2019

Authors Nikola Vojvodić, Leposava Ristić, and Milan Bebić
Year 2019
Publisher Društvo termičara Srbije
ISSN/ISBN 978-86-7877-033-3
Page from 385
Page to 394

Energy optimal control of induction motor drive - study of two cases

L. Stanić, Ž. Koprivica, N. Vojvodić, L. Ristić, M. Bebić, Energy optimal control of induction motor drive - study of two cases, VII Regionalna konferencija - Industrijska energetika i zaštita životne sredine u zemljama jugoistočne Evrope, pp. 365 - 374, Društvo termičara Srbije, Zlatibor, 2019

Authors Luka Stanić, Žarko Koprivica, Nikola Vojvodić, Leposava Ristić, and Milan Bebić
Year 2019
Publisher Društvo termičara Srbije
ISSN/ISBN 978-86-7877-033-3
Page from 365
Page to 374

ANALYSIS OF ENERGY EFFICIENCY AND INFLUENCE TO THE SUPPLY GRID OF ELECTRICAL DRIVES WITH ACTIVE RECTIFIER

L. Ristić, M. Bebić, T. Taluo, M. Šinik, I. Mihailović, D. Jevtić, N. Rašić, ANALYSIS OF ENERGY EFFICIENCY AND INFLUENCE TO THE SUPPLY GRID OF ELECTRICAL DRIVES WITH ACTIVE RECTIFIER, VI Regional Conference: “Industrial Energy and Environmental Protection in South Eastern Europe, pp. 1 - 6, Zlatibor, Srbija, Jun, 2017

Authors Leposava Ristić, Milan Bebić, Taufik Taluo, Marko Šinik, Ilija Mihailović, Dragan Jevtić, and Neša Rašić
Year 2017
ISSN/ISBN 978-86-7877-028-9
Page from 1
Page to 6

MODERNIZACIJA ELEKTRO DELA PAPIR MAŠINE PRILAGOĐENA OGRANIČENOM OBIMU I DINAMICI INVESTIRANJA

B. Jeftenić, M. Bebić, N. Rašić, D. Jevtić, L. Ristić, I. Mihailović, S. Štatkić, I. Jeftenić, MODERNIZACIJA ELEKTRO DELA PAPIR MAŠINE PRILAGOĐENA OGRANIČENOM OBIMU I DINAMICI INVESTIRANJA, XX MEĐUNARODNI SIMPOZIJUM IZ OBLASTI CELULOZE, PAPIRA, AMBALAŽE I GRAFIKE, pp. 175 - 183, Zlatibor, Jun, 2015

Authors Borislav Jeftenić, Milan Bebić, Neša Rašić, Dragan Jevtić, Leposava Ristić, Ilija Mihailović, Saša Štatkić, and Ilija Jeftenić
Year 2015
ISSN/ISBN 978-86-7401-323-6
Page from 175
Page to 183

Realizacija sistema rudarskih mašina povećane efikasnosti na površinskim kopovima - upravljanje i pokretanje

L. Ristić, N. Rašić, D. Jevtić, I. Mihailović, M. Bebić, B. Jeftenić, S. Štatkić, Realizacija sistema rudarskih mašina povećane efikasnosti na površinskim kopovima - upravljanje i pokretanje, X međunarodni simpozijum ISTRAŽIVANJA I PROJEKTOVANJA ZA PRIVREDU, pp. 220 - 241, Institut za istraživanja i projektovanja za privredu, Beograd, Dec, 2014

Authors Leposava Ristić, Neša Rašić, Dragan Jevtić, Ilija Mihailović, Milan Bebić, Borislav Jeftenić, and Saša Štatkić
Year 2014
Publisher Institut za istraživanja i projektovanja za privredu
ISSN/ISBN 978-86-84231-35-4
Page from 220
Page to 241

Poništavanje viših harmonika u višemotornom pogonu sa krutom mehaničkom vezom

N. Rašić, S. Štatkić, L. Ristić, M. Bebić, Poništavanje viših harmonika u višemotornom pogonu sa krutom mehaničkom vezom, 57. konferencija ETRAN, Društvo za Etran, Zlatibor, 2013

Authors Neša Rašić, Saša Štatkić, Leposava Ristić, and Milan Bebić
Year 2013
Publisher Društvo za Etran

Regulisani pogoni tračnih transportera V BTO sistema na PK "Drmno" - iskustva u primeni

B. Jeftenić, N. Rašić, D. Jevtić, M. Bebić, I. Mihailović, L. Ristić, Regulisani pogoni tračnih transportera V BTO sistema na PK "Drmno" - iskustva u primeni, Mehanizacija i automatizacija u rudarstvu i energetika - MAREN 2012, pp. 1 - 19, Rudarsko - geološki fakultet, Univerzitet u Beogradu, Lazarevac, Srbija, Jun, 2012

Authors Borislav Jeftenić, Neša Rašić, Dragan Jevtić, Milan Bebić, Ilija Mihailović, and Leposava Ristić
Year 2012
Publisher Rudarsko - geološki fakultet, Univerzitet u Beogradu
Page from 1
Page to 19

Elektromotorni pogoni i upravljački sistem poprečnog rezača AS-28 u Fabrici kartona Umka

M. Bebić, N. Rašić, L. Ristić, I. Jeftenić, D. Jevtić, I. Mihailović, B. Jeftenić, S. Đurić, D. Nešković, Elektromotorni pogoni i upravljački sistem poprečnog rezača AS-28 u Fabrici kartona Umka, Zbornik radova XVIII Međunarodnog simpozijuma iz oblasti celuloze, papira, ambalaže i grafike CPA&G, pp. 144 - 153, Tehnološko-metalurški fakultete, Univerzitet u Beogradu i Centar za celulozu, papir, ambalažu i grafiku Srbije, Zlatibor, Srbija, Jun, 2012

Authors Milan Bebić, Neša Rašić, Leposava Ristić, Ilija Jeftenić, Dragan Jevtić, Ilija Mihailović, Borislav Jeftenić, Slobodan Đurić, and Dragoslav Nešković
Year 2012
Publisher Tehnološko-metalurški fakultete, Univerzitet u Beogradu i Centar za celulozu, papir, ambalažu i grafiku Srbije
ISSN/ISBN 978-86-7401-283-3
Page from 144
Page to 153

Sistemi za nadzor i upravljanje pogonima papir i karton mašina

B. Jeftenić, M. Bebić, I. Mihailović, N. Rašić, D. Jevtić, L. Ristić, S. Štatkić, S. Lukić, S. Đurić, M. Stanković, V. Ilić, M. Zindović, Sistemi za nadzor i upravljanje pogonima papir i karton mašina, Zbornik radova sa XVII Međunarodnog simpozijuma iz oblasti celuloze, papira, ambalaže i grafike CPA&G, pp. 29 - 39, Tehnološko-metalurški fakultete, Univerzitet u Beogradu i Centar za celulozu, papir, ambalažu i grafiku Srbije, Zlatibor, Srbija, Jun, 2011

Authors Borislav Jeftenić, Milan Bebić, Ilija Mihailović, Neša Rašić, Dragan Jevtić, Leposava Ristić, Saša Štatkić, Staniša Lukić, Slobodan Đurić, Milan Stanković, Vladimir Ilić, and Milan Zindović
Year 2011
Publisher Tehnološko-metalurški fakultete, Univerzitet u Beogradu i Centar za celulozu, papir, ambalažu i grafiku Srbije
ISSN/ISBN 978-86-7401-275-8
Page from 29
Page to 39

Novi elektromotorni pogon papir mašine u Fabrici Hartije Beograd

B. Jeftenić, M. Bebić, N. Rašić, D. Jevtić, I. Mihailović, L. Ristić, V. Ilić, M. Zindović, Novi elektromotorni pogon papir mašine u Fabrici Hartije Beograd, Zbornik radova sa XVI Međunarodnog simpozijuma iz oblasti celuloze, papira, ambalaže i grafike CPA&G, pp. 41 - 48, Tehnološko-metalurški fakultete, Univerzitet u Beogradu i Centar za celulozu, papir, ambalažu i grafiku Srbije, Zlatibor, Srbija, Jun, 2010

Authors Borislav Jeftenić, Milan Bebić, Neša Rašić, Dragan Jevtić, Ilija Mihailović, Leposava Ristić, Vladimir Ilić, and Milan Zindović
Year 2010
Publisher Tehnološko-metalurški fakultete, Univerzitet u Beogradu i Centar za celulozu, papir, ambalažu i grafiku Srbije
ISSN/ISBN 978-86-7401-267-3
Page from 41
Page to 48

Projektovanje i realizacija novih rudarskih mašina na kopu Drmno – elektro deo

B. Jeftenić, N. Rašić, D. Jevtić, M. Bebić, I. Mihailović, L. Ristić, S. Štatkić, Projektovanje i realizacija novih rudarskih mašina na kopu Drmno – elektro deo, Mehanizacija i automatizacija u rudarstvu i energetika - MAREN 2010, Rudarsko - geološki fakultet, Univerzitet u Beogradu, Lazarevac, Srbija, Jun, 2010

Authors Borislav Jeftenić, Neša Rašić, Dragan Jevtić, Milan Bebić, Ilija Mihailović, Leposava Ristić, and Saša Štatkić
Year 2010
Publisher Rudarsko - geološki fakultet, Univerzitet u Beogradu

Revitalizacija i modernizacija sistema za upravljanje i pokretanje rudarskih mašina na kopu Drmno u periodu 2002-2010.

B. Jeftenić, N. Rašić, M. Bebić, D. Jevtić, S. Štatkić, I. Mihailović, L. Ristić, Revitalizacija i modernizacija sistema za upravljanje i pokretanje rudarskih mašina na kopu Drmno u periodu 2002-2010., Mehanizacija i automatizacija u rudarstvu i energetika - MAREN 2012, Rudarsko - geološki fakultet, Univerzitet u Beogradu, Lazarevac, Srbija, Jun, 2010

Authors Borislav Jeftenić, Neša Rašić, Milan Bebić, Dragan Jevtić, Saša Štatkić, Ilija Mihailović, and Leposava Ristić
Year 2010
Publisher Rudarsko - geološki fakultet, Univerzitet u Beogradu

Razvoj algoritma za regulaciju brzine sistema tračnih transportera

B. Jeftenić, L. Ristić, M. Bebić, S. Štatkić, N. Rašić, D. Jevtić, M. Gvozdenović, Razvoj algoritma za regulaciju brzine sistema tračnih transportera, Zbornik radova XV Međunarodnog simpozijuma Energetska elektronika – Ee 2009, Društvo za energetsku elektroniku, Republika Srbija, Novi Sad, Srbija, Oct, 2009

Authors Borislav Jeftenić, Leposava Ristić, Milan Bebić, Saša Štatkić, Neša Rašić, Dragan Jevtić, and Milorad Gvozdenović
Year 2009
Publisher Društvo za energetsku elektroniku, Republika Srbija
ISSN/ISBN 978-86-7892-356-2

Daljinski nadzor i upravljanje sistemom tračnih transportera

B. Jeftenić, M. Bebić, L. Ristić, D. Jevtić, I. Mihailović, N. Rašić, S. Štatkić, Daljinski nadzor i upravljanje sistemom tračnih transportera, Zbornik radova XV Međunarodnog simpozijuma Energetska elektronika – Ee 2009, Društvo za energetsku elektroniku, Republika Srbija, Novi Sad, Srbija, Oct, 2009

Authors Borislav Jeftenić, Milan Bebić, Leposava Ristić, Dragan Jevtić, Ilija Mihailović, Neša Rašić, and Saša Štatkić
Year 2009
Publisher Društvo za energetsku elektroniku, Republika Srbija
ISSN/ISBN 978-86-7892-356-2

Retrospektiva razvoja elektromotornih pogona u papirnoj industriji kod nas u poslednjih 10 godina i planovi za budućnost

B. Jeftenić, M. Bebić, L. Ristić, S. Štatkić, D. Jevtić, N. Rašić, Retrospektiva razvoja elektromotornih pogona u papirnoj industriji kod nas u poslednjih 10 godina i planovi za budućnost, Zbornik radova sa XV Međunarodnog simpozijuma iz oblasti celuloze, papira, ambalaže i grafike CPA&G, pp. 41 - 49, Tehnološko-metalurški fakultete, Univerzitet u Beogradu i Centar za celulozu, papir, ambalažu i grafiku Srbije, Zlatibor, Srbija, Jun, 2009

Authors Borislav Jeftenić, Milan Bebić, Leposava Ristić, Saša Štatkić, Dragan Jevtić, and Neša Rašić
Year 2009
Publisher Tehnološko-metalurški fakultete, Univerzitet u Beogradu i Centar za celulozu, papir, ambalažu i grafiku Srbije
ISSN/ISBN 978-86-7401-259-8
Page from 41
Page to 49

Other papers

Razvoj algoritma za povećanje energetske efikasnosti sistema tračnih transportera na površinskim kopovima

L. Ristić, Razvoj algoritma za povećanje energetske efikasnosti sistema tračnih transportera na površinskim kopovima, Odbranjena doktorska disertacija, pp. 1 - 160, Beograd, Srbija, Jul, 2012

Authors Leposava Ristić
Year 2012
Page from 1
Page to 160

Višemotorni regulisani pogoni i energetska efikasnosti u praksi

B. Jeftenić, S. Štatkić, M. Bebić, L. Ristić, Višemotorni regulisani pogoni i energetska efikasnosti u praksi, Energetska efikasnost elektromotornih pogona, pp. 219 - 337, Tehnički fakultet u Čačku, Univerzitet u Kragujevcu, Dec, 2012

Authors Borislav Jeftenić, Saša Štatkić, Milan Bebić, and Leposava Ristić
Year 2012
Publisher Tehnički fakultet u Čačku, Univerzitet u Kragujevcu
ISSN/ISBN 978-86-7776-147-9
Page from 219
Page to 337

Books and bibiliographies

Praktikum za laboratorijske vežbe iz elektromotornih pogona

L.Ristić, M. Bebić, N. Vojvodić, B. Jeftenić, Praktikum za laboratorijske vežbe iz elektromotornih pogona, Univerzitet u Beogradu - Elektrotehnički fakultet, Akademska misao, Beograd, 2021

Authors Leposava Ristić, Milan Bebić, Nikola Vojvodić, and Borislav Jeftenić
Year 2021
Publisher Univerzitet u Beogradu - Elektrotehnički fakultet, Akademska misao, Beograd
ISBN 978-86-7466-871-9
Page count 153
Book type elektronski pomoćni udžbenik
Page count 153

Praktikum za primenu energetski efikasnih kaveznih asinhronih motora u elektromotornim pogonima

S. Štatkić, M. Bebić, L. Ristić, B. Jeftenić, Praktikum za primenu energetski efikasnih kaveznih asinhronih motora u elektromotornim pogonima, Saša Štatkić, 2016

Authors Saša Štatkić, Milan Bebić, Leposava Ristić, and Borislav Jeftenić
Year 2016
Publisher Saša Štatkić
ISBN 978-86-920211-0-7
Page count 144
Book type pomoćni udžbenik
Page count 144

Design and Selection of Belt Conveying Equipment & Systems," Chapter in Design and Selection of Bulk Material Handling Equipment and Systems : Mining, Mineral Processing, Port, Plant and Excavation Engineering

B. Jeftenić, M. Bebić, L. Ristić, S. Štatkić, Design and Selection of Belt Conveying Equipment & Systems," Chapter in Design and Selection of Bulk Material Handling Equipment and Systems : Mining, Mineral Processing, Port, Plant and Excavation Engineering, Wide Publishing, Kolkata, 2012

Authors Borislav Jeftenić, Milan Bebić, Leposava Ristić, and Saša Štatkić
Year 2012
Publisher Wide Publishing, Kolkata
ISBN 9788190904377
Page count 254
Book type monografija
Page count 254

Telekomunikacioni kablovi

S. Ristić, P. Ristić, L. Ristić, Telekomunikacioni kablovi, Autori, 2001

Authors Svetislav Ristić, Predrag Ristić, and Leposava Ristić
Year 2001
Publisher Autori
ISBN 86-902247-1-8
Page count 271
Book type pomoćni udžbenik
Page count 271

Zbirka zadataka iz električne vuče

S. Vukosavić, Ž. Janda, L. Ristić, Zbirka zadataka iz električne vuče, Zavod za grafičku tehniku Tehnološko-metalurškog fakulteta u Beogradu, Univerzitetski udžbenici (67), 1997

Authors Slobodan Vukosavić, Žarko Janda, and Leposava Ristić
Year 1997
Publisher Zavod za grafičku tehniku Tehnološko-metalurškog fakulteta u Beogradu, Univerzitetski udžbenici (67)
ISBN 86-81019-67-8
Page count 280
Book type udžbenik
Page count 280

Projects

International

Konferencija PowerTech Belgrade 2023

Type of project Konferencije (međunarodne)
Head professor PhD Predrag Stefanov
Business Partner MINISTARSTVO PROSVETE REPUBLIKA SRBIJA
Beginning of realization 2023-05-10

SUNRISE

Type of project HORIZON EUROPE
Head professor PhD Predrag Stefanov
Beginning of realization 2022-12-27
Scientific

Istaživanje, razvoj i primena programa i mera za energetsku efikasnost elektromotornih pogona-NASTAVAK

Type of project Nauka- Projekti NIO
Head professor PhD Milan Bebić
Business Partner MINISTARSTVO PROSVETE REPUBLIKA SRBIJA
Beginning of realization 2020-02-24

Povećanje energetske efikasnosti u odabranom industrijskom sektoru kroz implementaciju sistema energetskog menadžmenta u malim i srednjim preduzećima-NASTAVAK

Type of project Nauka- Projekti NIO
Head professor PhD Milan Bebić
Business Partner MINISTARSTVO PROSVETE REPUBLIKA SRBIJA
Beginning of realization 2020-02-24

Laboratorijska platforma za primenu naprednih algoritama upravljanja u savremenim elektromotornim pogonima (LPUPE)

Type of project Projekti-Razvoj visokog obrazovanja
Head professor PhD Leposava Ristić
Business Partner MINISTARSTVO PROSVETE REPUBLIKA SRBIJA
Beginning of realization 2018-11-13

Istaživanje, razvoj i primena programa i mera za energetsku efikasnost elektromotornih pogona

Type of project Nauka – tehnološki razvoj
Head professor PhD Milan Bebić
Business Partner MINISTARSTVO NAUKE, TEHNOLOŠKOG RAZVOJA I INOVACIJA
Beginning of realization 2011-03-09

Povećanje energetske efikasnosti u odabranom industrijskom sektoru kroz implementaciju sistema energetskog menadžmenta u malim i srednjim preduzećima

Type of project Nauka – tehnološki razvoj
Head professor PhD Milan Bebić
Business Partner MINISTARSTVO NAUKE, TEHNOLOŠKOG RAZVOJA I INOVACIJA
Beginning of realization 2011-03-07
Commercial

Odrzavanje sistema upravljanja na rudarskim objektima na PK Drmno

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Milan Bebić
Business Partner EMP&A DOO Beograd
Beginning of realization 2024-04-10

Konstultantske usluge: Pustanje u rad elektromotornih pogona tracnih transportera u rudniku Pljevlja, Crna Gora

Type of project Ostali domaći komercijalni projekti (podtip)
Head professor PhD Milan Bebić
Business Partner EMP INŽENJERING 2016 D.O.O.
Beginning of realization 2023-12-08

Izrada tehnicke dokumentacije elektricnih instalacija i racunarskog upravljanja oklopnog borbenog vozila Lazar 3

Type of project Ostali domaći komercijalni projekti (podtip)
Head professor PhD Milan Bebić
Business Partner BORBENI SLOŽENI SISTEMI D.O.O.
Beginning of realization 2022-06-15

DIzajn elektricnog motora za novu generaciju ECF

Type of project Ostali domaći komercijalni projekti (podtip)
Head professor PhD Mladen Terzić
Business Partner BROSE DOO
Beginning of realization 2021-10-21

Podešavanje parametara i puštanje u rad višemotornog pogona bagera Eš 6/45

Type of project Komercijalni projekti sa lokalnim upravama
Head professor PhD Milan Bebić
Business Partner EMP INŽENJERING 2016 D.O.O.
Beginning of realization 2021-01-25

TEKO B3 : Konsultantske usluge iz elektroenergetike, telekomunikacija i sistema upravljanja

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Milan Bebić
Business Partner AKCIONARSKO DRUŠTVO "ELEKTROPRIVREDA SRBIJE" BEOGRAD
Beginning of realization 2020-09-02

Izrada tehnicke dokumentacije elektricnih instalacija i racunarskog upravljanja visenamenskog oklopnog borbenog vozila Dusan

Type of project Ostali domaći komercijalni projekti
Head professor PhD Goran Kvaščev
Business Partner JUGOIMPORT - SDPR J.P.
Beginning of realization 2020-08-20

Izrada tehnicke dokumentacije elektricnih instalacija i racunarskog upravljanja visenamenskog oklopnog borbenog vozila Lazar

Type of project Ostali domaći komercijalni projekti
Head professor PhD Goran Kvaščev
Business Partner BORBENI SLOŽENI SISTEMI D.O.O.
Beginning of realization 2019-03-29

Analiza i verifikacija algoritama estimacije momenta u uređaju za dinamičku analizu elektromotornih pogona za primenu prediktivne metode održavanja industrijskih postrojenja i komunalnih sistema

Type of project Inovacioni fond - Vaučeri
Head professor PhD Milan Bebić
Business Partner NAVITAS LABS D.O.O.
Beginning of realization 2018-06-01

Izrada dokumentacije elektricnih instalacija BOV M16 Milos

Type of project Ostali domaći komercijalni projekti
Head professor PhD Goran Kvaščev
Business Partner BORBENI SLOŽENI SISTEMI D.O.O.
Beginning of realization 2018-02-28

Izrada TD i revitalizacija mosnog krana 125/20 t u HE Bistrica

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Milan Bebić
Business Partner AKCIONARSKO DRUŠTVO "ELEKTROPRIVREDA SRBIJE" BEOGRAD
Beginning of realization 2017-08-18

Odrzavanje PLC na dizalicama 400 t HE Djerdap

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Milan Bebić
Business Partner AKCIONARSKO DRUŠTVO "ELEKTROPRIVREDA SRBIJE" BEOGRAD
Beginning of realization 2017-05-15

Komunalni i elektronski otpad

Type of project Ostali domaći komercijalni projekti
Head professor PhD Leposava Ristić
Business Partner ARUM DEČ DOO DEČ
Beginning of realization 2016-10-03

Izrada projekta rekonstrukcije krana 100/15 t u LI HE - HE Potpeć

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Milan Bebić
Business Partner AKCIONARSKO DRUŠTVO "ELEKTROPRIVREDA SRBIJE" BEOGRAD
Beginning of realization 2016-02-18

Projekat zamene pogona i upravljanja sifonskim dizalicama u HE Zvornik

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Milan Bebić
Business Partner AKCIONARSKO DRUŠTVO "ELEKTROPRIVREDA SRBIJE" BEOGRAD
Beginning of realization 2016-02-18

Održavanje postrojenja sa ABB PLC

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Milan Bebić
Business Partner AKCIONARSKO DRUŠTVO "ELEKTROPRIVREDA SRBIJE" BEOGRAD
Beginning of realization 2016-02-18

Odrzavanja postrojenje sa PLC ABB

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Milan Bebić
Business Partner AKCIONARSKO DRUŠTVO "ELEKTROPRIVREDA SRBIJE" BEOGRAD
Beginning of realization 2015-09-23

Projekat Rekonstrukcije sistema upravljanja i zamene Vard-Leonardove grupe statickim i frekventni pretvaracima za rotorne bagere SRs1200+VR(pogonski G-4, G-5 i G-6) na pogonu Polje D

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Milan Bebić
Business Partner RUDARSKI BASEN "KOLUBARA" DOO, LAZAREVAC
Beginning of realization 2015-08-10

Nabavka elektro opreme, nadzor nad montazom, ispitivanje i pustanje u rad i izrada projekta izvedenog stanja za Odlagac BRs/Ars 1600 3 (Odlagac 3) sa uslugom ugradnje

Type of project Ostali domaći komercijalni projekti
Head professor PhD Milan Bebić
Business Partner "COMEL" D.O.O. Beograd
Beginning of realization 2015-08-10

Revitalizacija potopljene el. opreme BRx140 35/50.1 (Bandwagen 4)Tamnava Zapad sa uslugom ugradnje

Type of project Ostali domaći komercijalni projekti
Head professor PhD Milan Bebić
Business Partner "COMEL" D.O.O. Beograd
Beginning of realization 2015-08-10

Izrada projekta "Rekonstrukcija i modernizacija elektoropreme bagera dreglajna ES 10/70 na pogonu Polja D"

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Milan Bebić
Business Partner RUDARSKI BASEN "KOLUBARA" DOO, LAZAREVAC
Beginning of realization 2015-04-09

Usluge izrade Projekta rekonstrukcije sistema upravljanja ѕa rotorni bager SRs 2000 (pogodnski broj G-2) na pogonu Tamnava-Zapadno polje

Type of project Ostali domaći komercijalni projekti
Head professor PhD Milan Bebić
Business Partner RUDARSKI BASEN "KOLUBARA" DOO, LAZAREVAC
Beginning of realization 2015-03-26

Projektantske i konsultantske usluge /Izrada projektne dokumentacije obrtnog transportera B-1600

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Milan Bebić
Business Partner P.D. "TERMOELEKTRANE I KOPOVI KOSTOLAC" D.O.O.
Beginning of realization 2015-02-12

Održavanje postrojenja sa "PLC ABB"

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Borislav Jeftenić
Business Partner P.D. "TERMOELEKTRANE I KOPOVI KOSTOLAC" D.O.O.
Beginning of realization 2014-08-18

Tehnička kontrola Glavnog elektroprojekta zamene sistema upravljanja na bagerima SchRs630 G1 i G4 na pogonu Tamnava-Zapadno polje

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Milan Bebić
Business Partner RUDARSKI BASEN "KOLUBARA" DOO, LAZAREVAC
Beginning of realization 2013-10-24

Održavanje postrojenja sa PLC ABB

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Borislav Jeftenić
Business Partner P.D. "TERMOELEKTRANE I KOPOVI KOSTOLAC" D.O.O.
Beginning of realization 2013-07-04

Pružanje inženjering usluga za potrebe Rekontrukcije i modernizacije elektro dea de portalne dizalice EPD-160/50t-15m-UK instalirane na ulaznoj građevini HE Đerdap 1 u Kladovu

Type of project Ostali domaći komercijalni projekti
Head professor PhD Borislav Jeftenić
Business Partner MIKRO KONTROL D.O.O.
Beginning of realization 2012-12-19

Održavanje postrojenje asa "PLC ABB"

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Borislav Jeftenić
Business Partner P.D. "TERMOELEKTRANE I KOPOVI KOSTOLAC" D.O.O.
Beginning of realization 2012-08-14

Izrada projekta modernizacije sa puštanjem u rad odlagača A2RsB-7200-elektro deo

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Borislav Jeftenić
Business Partner P.D. "TERMOELEKTRANE I KOPOVI KOSTOLAC" D.O.O.
Beginning of realization 2012-08-14

Izrada projekta rekonstrukcije i modernizacije sa puštanjem u rad dva band vagena-odlagača B2400-elektro deo

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Borislav Jeftenić
Business Partner P.D. "TERMOELEKTRANE I KOPOVI KOSTOLAC" D.O.O.
Beginning of realization 2012-08-14

Izrada projekta rekonstrukcije i puštanje u rad pogonske stanice B1600, 4 h 315kV

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Borislav Jeftenić
Business Partner P.D. "TERMOELEKTRANE I KOPOVI KOSTOLAC" D.O.O.
Beginning of realization 2011-10-11

Izrada projekta modernizacije sa puštanjem u rad bagera Sr 2000-elektro deo

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Borislav Jeftenić
Business Partner P.D. "TERMOELEKTRANE I KOPOVI KOSTOLAC" D.O.O.
Beginning of realization 2010-11-03

Projekat izrade dva transportera B 2000- Elektro deo

Type of project Ostali domaći komercijalni projekti
Head professor PhD Borislav Jeftenić
Business Partner "GOŠA - FABRIKA OPREME I MAŠINA" A.D.
Beginning of realization 2010-07-08

Glavni projekat modernizacije elektroopreme dizalice 25 t - čistilica na ulaznoj građevini HE "Đerdap 1" Kladovo

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Borislav Jeftenić
Business Partner PRIVREDNO DRUŠTVO "HIDROELEKTRANA ĐERDAP" D.O.O. KLADOVO
Beginning of realization 2010-07-01

Tekuće intervencije " TE KO Kostolac"

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Borislav Jeftenić
Business Partner P.D. "TERMOELEKTRANE I KOPOVI KOSTOLAC" D.O.O.
Beginning of realization 2009-02-02

Obrazovanje korisnika iz industrije u oblasti korišćenja frekventnih pretvarača

Type of project Ostali domaći komercijalni projekti
Head professor PhD Milan Bebić
Business Partner "DANFOSS" D.O.O
Beginning of realization 2008-09-17

Usluge za prevođenje tehničke dokumentacije

Type of project Ostali domaći komercijalni projekti
Head professor PhD Milan Bebić
Business Partner "DANFOSS" D.O.O
Beginning of realization 2005-12-27

Pruzanje konsultanskih-strucnih usluga po zahtevu

Type of project Komercijalni projekti sa javnim preduzećima
Head professor PhD Miroslav Dukić
Business Partner "TELEKOM SRBIJA" A.D.
Beginning of realization 2003-12-18